How to Fix a Sagging Mattress » 8 Simple Ways

Share the Love
  •  
  •  
  •  
  •  
  •  
  •  

A sagging mattress that sinks at the center or in various spots may be a signal that your mattress is getting old. With a sinking mattress, you may experience discomforts, backaches, back pain and general sleep discomforts. Also, such a mattress may interfere with your sleeping cycle. Since mattress no longer lasts for 10-20 years, your mattress will sink at one particular time.

Ideally, the best option, when you have a sagging mattress is to buy a replacement. However, your budget may be fixed and not in a position to by a new mattress. But if your mattress is not sagging too much, you may want to fix it.

The sole goal of fixing a sagging mattress is to give it a fresh and extend its life. Some contemporary mattresses such as air mattresses require simple fixing while traditional mattress needs complex repair.

   1. Mattress Toppermattress topper for sagging mattress

A mattress topper is a sure way of dealing with a sagging mattress. There are various memory foam toppers that can help rejuvenate your sleeping comfort. Mattress toppers are cheap, yet they cover the top of your mattress. Further memory foam toppers contour to the body as you sleep to help alleviate back, hip, and neck pains.

>> READ MORE: 10 Best Rated Memory Foam Mattress Toppers 2017

   2. Box Springs 

metal mattress box springsIf your mattress has underneath springs, you may want to inspect them. In case the springs are worn out, you should replace them to help fix the sag in the mattress. Purchasing replacement box spring is a great option to fix your sagging mattress. Also, it is less expensive as compared to purchasing a new mattress.

   3. Support the mattress with plywoodPlywood helps sagging mattressIf you have a spring box, plywood may be a good option to fix the sag. Carefully measure your mattress and cut 1/2-inch thick plywood the same size of your mattress. In case your mattress is large, you can use two pieces. You should place the plywood between the mattress and the box spring.

  4. Special Bladder

There are special bladders also inflation pouches that pump ups air like air mattresses and can be placed between the box spring and mattress in place of the sag. These bladders are of various sizes so you can choose the one that fits your bed.

   5. Replacing Bed SlatsBed Slats

Inspect the slats under the box spring. In case they are wrapped, you should replace them. Add one or more slats according to the sag level of your mattress. The slats should be added on the part of the sag and the goal is to achieve extra support. If you want extra support, you can replace the 1x4s (normal width of slats) with 1x8s or 1x6s. Ensure the slats are of the same size as the ones in your bed.

   6. Preventing mattress sinking and sagging

There are various ways to prevent your mattress from sagging. However, these methods will only delay the sagging since mattresses are not designed to last forever. Note that preventing the sag is a great idea since you will not have to spend on a mattress soon. It also helps to prevent body pains such as back, hip, shoulder and neck pains.

   7. Flipping or rotating your mattressFlipping and rotating

Rotating or flipping your mattress is a temporary solution that can help to delay the sagging. You can shift your mattress in 3 cycles regularly. However, this technique is not applicable to those with a no-turn mattress. Rotate your mattress to swap the head position to the foot position. Avoid flipping the mattress in this first cycle. In the second cycle, flip your mattress over, but do not rotate it in this cycle. In the third cycle, rotate the mattress to the head position to the foot position again. The third cycle should be on the opposite side of the first position.

   8. Constant Checking and Maintenance

Inspect both the slats and box springs of in your bed regularly. The aim is to ensure that the slats and springs are in good position. Ensure the springs offer relative support and are still springy. Inspect for signs of wrapping on the slats. Keeping the spring box and slats strong is the key to preventing mattress sagging.

Fixing a sagging mattress is a great idea that helps prevent sleep discomforts and body pains. Nevertheless, the first step is buying a supportive and sturdy mattress that will not sag soon.


Share the Love
  •  
  •  
  •  
  •  
  •  
  •  

3 Comments

  1. Jerrie Reply
  2. Rick Reply

Leave a Reply to Laura Cancel reply

Your email address will not be published. Required fields are marked *